{"product_id":"pro-pctg-gf10-10-glass-fiber-pctg-natural-1-75mm","title":"Pro PCTG-GF10, 10% Glass Fiber PCTG, Natural, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003ePro PCTG-GF10 is 3D-Fuel Pro PCTG reinforced with 10% glass fiber\u003c\/strong\u003e, made in Fargo, North Dakota. You get the chemical resistance, heat resistance and PETG-style printing of Pro PCTG with higher stiffness, better dimensional stability and a matte surface that hides layer lines. 1.75 mm, 1 kg spools.\u003c\/p\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrackets, mounts, jigs and fixtures that must stay stiff under load\u003c\/li\u003e\n\u003cli\u003eLarge flat parts where warping and sag matter\u003c\/li\u003e\n\u003cli\u003eParts that need a matte, professional finish straight off the printer\u003c\/li\u003e\n\u003cli\u003eGarage, shop and outdoor use: the same chemical and UV resistance as Pro PCTG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNot the right choice for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrinters with a brass nozzle. Glass fiber is abrasive; use a hardened steel nozzle, 0.4 mm or larger\u003c\/li\u003e\n\u003cli\u003eLiving hinges and snap-fits that flex repeatedly. Unfilled Pro PCTG is the tougher, more ductile choice\u003c\/li\u003e\n\u003cli\u003eTransparent or glossy parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrint Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e Hardened steel, 0.4 mm or larger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle Temperature:\u003c\/strong\u003e 260C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Temperature:\u003c\/strong\u003e 65-70C on textured PEI. At 80C it sticks too well and can damage the sheet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Cooling:\u003c\/strong\u003e Lower than unfilled Pro PCTG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Volumetric Speed:\u003c\/strong\u003e 6-8 mm³\/s on a 0.4 mm nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Advance:\u003c\/strong\u003e Calibrate for GF10. The fibers change the value; do not reuse the Pro PCTG or PETG number\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfiles:\u003c\/strong\u003e Start from the \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/22046343945495\" rel=\"noopener\" target=\"_blank\"\u003ePro PCTG profile\u003c\/a\u003e for your printer and apply the settings above. Dedicated GF10 profiles are in progress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 70C for 6-8 hours. Fiber-filled filament takes on moisture faster than unfilled Pro PCTG; dry before the first print and store with desiccant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eColor: Natural.\u003c\/strong\u003e Translucent off-white with a matte, layer-hiding finish from the glass fiber.\u003c\/p\u003e\n\u003ch3\u003eMaterial notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBase resin: 3D-Fuel Pro PCTG (Tg 84C, HDT 74C at 0.455 MPa, ASTM D648)\u003c\/li\u003e\n\u003cli\u003eReinforcement: 10% glass fiber\u003c\/li\u003e\n\u003cli\u003eAbrasive: yes\u003c\/li\u003e\n\u003cli\u003eBambu AMS compatible spool. Feed fiber-filled filament with as little path friction as possible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/3D-Fuel_Pro_PCTG_TDS_9-2-25.pdf?v=1787915348\" rel=\"noopener\" target=\"_blank\"\u003ePro PCTG TDS\u003c\/a\u003e · \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/3D-Fuel_Pro_PCTG_SDS_rev_2-16-25.pdf?v=1787908538\" rel=\"noopener\" target=\"_blank\"\u003ePro PCTG SDS\u003c\/a\u003e · \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/3D-Fuel_RoHS_Letter_of_Conformity_-_9_2_25_10_48_AM.pdf?v=1756828167\" rel=\"noopener\" target=\"_blank\"\u003eRoHS letter\u003c\/a\u003e (base resin; a fiber-grade data sheet is in progress)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuality:\u003c\/strong\u003e Every spool is extruded, laser-measured and wound in Fargo, North Dakota. Diameter tolerance ±0.02 mm. \u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel filament quality\" rel=\"noopener\" target=\"_blank\"\u003eLearn more about 3D-Fuel filament quality.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eEvery spool of Pro PCTG arrives on a durable plastic reel compatible with the Bambu Lab AMS, vacuum-sealed with a desiccant packet to keep out moisture. Spool sizes are net filament weight. \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360059449374\" title=\"3D-Fuel spool sizes and weights\" rel=\"noopener\" target=\"_blank\"\u003eSee spool sizes and weights.\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Pro PCTG-GF10 \/ 1kg 1.75mm Spool \/ Natural","offer_id":67753970205037,"sku":"E45G00","price":78.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/8392\/8685\/files\/E45G00-ProPCTG-GF-Natural-Spool.jpg?v=1792575422","url":"https:\/\/www.consum3d.com\/products\/pro-pctg-gf10-10-glass-fiber-pctg-natural-1-75mm","provider":"CONSUM3D","version":"1.0","type":"link"}