{"product_id":"xtr-flexi-plate-with-textured-ultem-pei-prusa-xl-365-x-365","title":"XTR Flexi Plate with Textured ULTEM PEI - Prusa XL - 365 x 365","description":"\u003cp style=\"font-size: 16px;\"\u003e\u003cstrong\u003eFits: Prusa XL\u003c\/strong\u003e\u003c\/p\u003e\n    \u003cp style=\"font-size: 12px;\"\u003e(Please see full printer list below on the 'Fits \u0026amp; Contents' tab)\u003c\/p\u003e\n\n    \u003ch3\u003eDescription\u003c\/h3\u003e\u003cdiv\u003e\n         \u003cp\u003eWham Bam's Textured PEI Flexi Plates in the XTR (or eXTReme version) start with Wham Bam's thicker 0.6mm high chromium spring steel to better resist the peel forces of edge-to-edge prints or high shrinkage filaments. They are then electrostatically powder painted with authentic ULTEM™ brand PEI from Sabic, and kiln-baked for exceptional durability. The Flexi Plate has a double-sided textured PEI coating leaving a pronounced finish on the bottom of your print.\u003c\/p\u003e\n\u003cp\u003eCompatible with the Wham Bam Magnetic Base (not included), this Flexi Plate is ideal for a variety of filaments, including PLA, TPU, PETG, and ABS. For additional adhesion with challenging materials like Nylon, use purple glue sticks or Magigoo, which wash off easily.\u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003ch3\u003eFits \u0026amp; Contents\u003c\/h3\u003e\u003cdiv\u003e\n        \u003cb\u003ePrinter Fits:\u003c\/b\u003e\u003cbr\u003e\n            • Prusa XL\n            \u003cbr\u003e\n            \u003cbr\u003e\n        \u003cb\u003eDo you have a printer similar to what's listed under Printer Fits or May Fit?\u003c\/b\u003e\u003cbr\u003e\n        If you have a printer similar to the one described above and believe Wham Bam's solution could work for your printer, please follow Wham Bam's easy instructions on measuring your build plate. \u003cbr\u003e\u003cbr\u003e\n        \n        \u003cdiv class=\"image-wrapper\"\u003e\n            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0016\/6179\/6450\/files\/MeasureYour3DPrinterBed2_42900b14-1862-4bf3-91e5-a504dcc280e6.jpg?v=1723124973\" alt=\"Measure Your Build Plate\"\u003e\n        \u003c\/div\u003e\n\n        \u003ch4\u003eContents \u0026amp; Tech Info\u003c\/h4\u003e\n        \u003cdiv\u003e\n             \u003cb\u003eIncludes:\u003c\/b\u003e\n            \u003cul\u003e\n                \u003cli\u003e1 XTR Powder Painted Ultem™ PEI Flexi Plate\u003c\/li\u003e\n            \u003c\/ul\u003e\n            \u003cb\u003eDimensions:\u003c\/b\u003e\n            \u003cul\u003e\n                \u003cli\u003e365 x 365 mm\u003c\/li\u003e\n                \u003cli\u003eFlexi Plate 0.6 mm\u003c\/li\u003e\n                \u003cli\u003eULTEM™ PEI Build Surface 0.12 mm, on each side\u003c\/li\u003e\n            \u003c\/ul\u003e\n            \u003cb\u003eSensor Compatibility:\u003c\/b\u003e\n            \u003cul\u003e\n                \u003cli\u003eEddy current mesh\u003c\/li\u003e\n                \u003cli\u003eOptical sensors\u003c\/li\u003e\n                \u003cli\u003eTouch sensors\u003c\/li\u003e\n                \u003cli\u003eInductive\u003c\/li\u003e\n                \u003cli\u003eCapacitive\u003c\/li\u003e\n                \u003cli\u003eCartographer\u003c\/li\u003e\n            \u003c\/ul\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003ch3\u003eInstallation \u0026amp; Use\u003c\/h3\u003e\u003cdiv\u003e\n        \u003cp\u003eNote: You should already have a magnet or clips installed on your printer, as this is needed to use a Flexi Plate.\u003c\/p\u003e\n        \u003ch4\u003eLevel after install\u003c\/h4\u003e\n        \u003cdiv\u003e\n            \u003cp\u003eIf your machine has automatic bed leveling, run the leveling process and set your gap such that the first layer is well squished. For more details on achieving the right first layer squish, refer to this \u003ca href=\"https:\/\/www.whambamsystems.com\/pages\/bed-leveling-help\" target=\"_blank\"\u003ebed leveling guide\u003c\/a\u003e.\u003c\/p\u003e\n            \u003cp\u003eIf your printer uses manual leveling, follow \u003ca href=\"https:\/\/www.whambamsystems.com\/pages\/bed-leveling-help\" target=\"_blank\"\u003e the same guide\u003c\/a\u003e for instructions on the leveling process.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003ch4\u003eUse \u0026amp; Maintenance\u003c\/h4\u003e\n        \u003cdiv\u003e\n            \u003cb\u003ePowder Painted Ultem™ PEI Best Practice Use\u003c\/b\u003e:\u003cbr\u003e\u003cbr\u003e\n            \u003cp\u003e\u003cb\u003eCleaning Before \u0026amp; After prints\u003c\/b\u003e\u003cbr\u003e\nAfter every print, Wham Bam suggests wiping with isopropyl alcohol and a fresh paper towel. If you have small bits, such as purge lines, stuck to the surface you can try with a steel spatula with corners rounded to carefully remove these. Do not use Acetone as this will damage the surface.\u003c\/p\u003e\n               \u003cdiv class=\"video-wrapper\"\u003e\n    \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/TrI3Zem9U1o?start=754\" allowfullscreen frameborder=\"0\"\u003e\n    \u003c\/iframe\u003e\n\u003c\/div\u003e\n          \u003cbr\u003e\n            \u003cp\u003e\u003cb\u003eLongterm  Contaminants cleaning\u003c\/b\u003e:\u003cbr\u003e\nShould the PEI ever lose its grip, you may also try common dish detergent or vinegar and clean with water as these help break fats added to filaments with effects. You can also lightly pass over the plate with 600 grit wet dry sandpaper to revitalize, then clean with IPA and a fresh paper towel.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003ch4\u003eSTL Download\u003c\/h4\u003e\n        \u003cdiv\u003e\n             \u003cdiv class=\"gray-box\"\u003e\n    \u003ca href=\"https:\/\/cults3d.com\/en\/3d-model\/tool\/build-plate-and-cap-holder\" target=\"_blank\" style=\"color: blue;\"\u003eTable Top \/ Wall Mount Flexi Plate Holder\u003c\/a\u003e\n\u003c\/div\u003e\n             \u003cdiv class=\"gray-box\"\u003e\n    \u003ca href=\"https:\/\/www.printables.com\/model\/730349-start-g-code-for-purge-lines-on-board-prusa-xl-5t-?lang=fr\" target=\"_blank\" style=\"color: blue;\"\u003ePrusa XL Purge Line Re-Position G-code\u003c\/a\u003e\n\u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cbr\u003e\n        \u003cp\u003eFull support info can be found on Wham Bam's \u003ca href=\"https:\/\/www.whambamsystems.com\/pages\/fbs-kits-support-page\" target=\"_blank\"\u003esupport page\u003c\/a\u003e.\u003c\/p\u003e\n    \u003c\/div\u003e","brand":"Wham Bam Systems","offers":[{"title":"Default Title","offer_id":53355334861165,"sku":"PP_365_365_FLX_3X","price":126.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/8392\/8685\/files\/SIZEDPEIPowderPainted_365x365XTR-PEIPPFlexi.jpg?v=1779242928","url":"https:\/\/www.consum3d.com\/products\/xtr-flexi-plate-with-textured-ultem-pei-prusa-xl-365-x-365","provider":"CONSUM3D","version":"1.0","type":"link"}