Elegoo Neptune 4 Max FDM 3D Printer Bundle

Big Prints. Fast Speeds. Klipper-Powered. Ready to Print.

This bundle pairs the Elegoo Neptune 4 Max with two 1kg spools of Elegoo PLA filament — Black and Grey — so you can unbox, level once, and start printing immediately. No sourcing filament separately, no waiting for supplies to arrive. Everything you need for your first large-format print is in the box.

What's included in this bundle:

• 1 × Elegoo Neptune 4 Max FDM 3D Printer
• 1 × Elegoo PLA Filament — Black | 1kg | 1.75mm
• 1 × Elegoo PLA Filament — Grey | 1kg | 1.75mm

The Elegoo Neptune 4 Max is built for makers who think on a large scale. With a 420 × 420 × 480mm build volume — big enough to print full-size helmet shells, large architectural models, and oversized functional parts in a single run — it removes the size constraints that hold most desktop FDM printers back.

And it doesn't sacrifice speed to get there. The Neptune 4 Max reaches print speeds of up to 500mm/s with an acceleration of 8,000mm/s², powered by Klipper firmware straight out of the box. Klipper gives you direct access to advanced tuning, input shaping, and pressure advance — the kind of control that experienced makers and tinkerers rely on to push print quality and speed to their limits. If you know Klipper, you know exactly what that means. If you're new to it, you're about to.

Designed for makers and creators who need room to build — perfect for:

• Large cosplay armor, helmet shells, and full-scale prop builds
• Oversized architectural models, interior design mockups, and scale prototypes
• Full-size RC car bodies, drone airframes, and large mechanical assemblies
• Batch printing — run multiple parts simultaneously across the full build plate
• Large decorative pieces, sculptures, and home decor that can't be split across multiple prints
• Functional large-format parts: panels, enclosures, frames, and structural components
• Any project that's been waiting for a printer big enough to handle it in one piece

Printer Compatibility: Compatible with standard 1.75mm FDM filaments, including PLA, PETG, and TPU.

What's in the Box

Elegoo Neptune 4 Max:

• Printer unit and frame assembly
• Print head/extruder assembly
• Touch screen interface
• Spool holder arm and spool holder
• Filament detector
• Power cable and fasteners
• User manual

Filament:

• 1 × Elegoo PLA Black | 1kg | 1.75mm
• 1 × Elegoo PLA Grey | 1kg | 1.75mm

Technical Specifications

• Printing Technology: FDM
• Build Volume: 420 × 420 × 480mm
• Firmware: Klipper (pre-installed)
• Print Speed: Up to 500mm/s
• Max Acceleration: 8,000mm/s²
• Filament Diameter: 1.75mm
• Compatible Materials: PLA, PETG, TPU and standard 1.75mm FDM filaments