3D-Fuel Standard PLA+ | Brightest White | 1.75mm | Made in USA

Pure NatureWorks Resin. No Fillers. Made in the USA. In Brightest White.

Clean, crisp, and brilliantly bright — Brightest White is the white that actually looks white. No yellowing, no off-tone warmth, just a sharp, high-contrast white that photographs well, paints cleanly, and makes every detail pop. It's the essential color for display models, medical and dental prints, product mockups, and any project where a truly white base is non-negotiable.

3D-Fuel Standard PLA+ is built on a simple premise: start with the best raw material and don't compromise it. Every spool is made from 100% virgin NatureWorks™ Ingeo 4043d PLA resin — no fillers, no stretchers, no blending agents. The result is a more predictable, consistent printing experience, spool after spool. Because no fillers are altering the melt behavior, you may find the ideal print temperature runs 5–10°C higher than your usual PLA settings — dial in from the lower end of the recommended range and adjust from there.

It's an easy-to-print, hard plastic with a pleasant, barely-there sugary scent during extrusion. The AMS-compatible spool makes it a natural fit for multi-color workflows on Bambu Lab systems, and it's been tested across a full range of printer brands for reliable performance wherever you run it.

Available in 1kg and 4kg spools — choose your spool size when adding to cart.

The go-to white for makers who need clean, consistent results — perfect for:

• Display models, product mockups, and presentation prototypes requiring a bright, clean base
• Medical, dental, and scientific visualization models
• Prints intended for painting, priming, or post-processing — white gives the truest color results
• Architectural scale models, interior design pieces, and structural details
• Multi-color Bambu Lab AMS workflows requiring a sharp, high-contrast white
• Photography props and content creation models where a clean background tone matters
• Figurines, busts, and collector pieces where surface detail visibility is critical

Printer Compatibility: Compatible with most 1.75mm FDM 3D printers. AMS-compatible spool. Tested in-house on Bambu Lab, Creality, Prusa, Raise3D, MakerBot, LulzBot, FlashForge, and more.

Key Properties

• Material: PLA+ — 100% virgin NatureWorks™ Ingeo 4043d PLA resin
• Color: Brightest White
• Origin: Made in the USA — 3D-Fuel US production facility
• Diameter: 1.75mm
• Diameter Tolerance: Multi-axis laser measurement and ovality control during production
• Print Temperature: 190–230°C (no fillers — start at lower end and adjust; may print 5–10°C higher than standard PLA)
• Bed Temperature: 0–60°C
• Print Speed: 60–250mm/s (higher speeds achievable at higher print temperatures)
• Bed Surfaces: Bambu High Temp Plate, Bambu Cool Plate, Bambu Textured PEI, heated bare glass, blue painter's tape, BuildTak, WhamBam
• Spool Options: 1kg (2.2lbs) / 4kg — AMS-compatible spool
• Key Strengths: No fillers or stretchers, virgin resin, consistent diameter, easy to print, pleasant scent
• Packaging: Vacuum-sealed with a desiccant packet to prevent moisture absorption
• Quality Control: Multi-axis laser diameter and ovality measurement in real-time during production
• Compatibility: Most 1.75mm FDM 3D printers, including Bambu Lab AMS