3D-Fuel Standard PLA+ | Grape Purple | 1.75mm | Made in USA | CONSUM3D

Pure NatureWorks Resin. No Fillers. Made in the USA. In Grape Purple.

Rich, deep, and unmistakably purple — Grape Purple Standard PLA+ is the go-to for creative projects that call for a bold, jewel-toned finish. Whether you're printing artistic models, cosplay props, or decorative pieces, it's a color that commands attention straight off the build plate.

3D-Fuel Standard PLA+ is built on a simple premise: start with the best raw material and don't compromise it. Every spool is made from 100% virgin NatureWorks™ Ingeo 4043d PLA resin — no fillers, no stretchers, no blending agents. The result is a more predictable, consistent printing experience, spool after spool. Because there are no fillers altering the melt behavior, you may find the ideal print temperature runs 5–10°C higher than your usual PLA settings — dial in from the lower end of the recommended range and adjust from there.

It's an easy-to-print, hard plastic with a pleasant, barely-there sugary scent during extrusion. The AMS-compatible spool makes it a natural choice for multi-color workflows on Bambu Lab systems, and it's been tested across a full range of printer brands for reliable performance wherever you run it.

Available in 1kg and 4kg spools — choose your spool size when adding to cart.

A rich, versatile purple for makers at every level — perfect for:

• Cosplay props, costume accessories, and wearable pieces with a regal finish
• Artistic models, collector figurines, and display pieces
• Decorative home accessories, candle holders, and seasonal decor
• Fantasy and sci-fi themed miniatures and tabletop gaming models
• Multi-color Bambu Lab AMS workflows requiring a deep, vivid purple
• Jewelry, keychains, and personalized gift items
• School and STEM projects where color differentiation adds clarity

Printer Compatibility: Compatible with most 1.75mm FDM 3D printers. AMS-compatible spool. Tested in-house on Bambu Lab, Creality, Prusa, Raise3D, MakerBot, LulzBot, FlashForge, and more.

Key Properties

• Material: PLA+ — 100% virgin NatureWorks™ Ingeo 4043d PLA resin
• Color: Grape Purple
• Origin: Made in the USA — 3D-Fuel US production facility
• Diameter: 1.75mm
• Diameter Tolerance: Multi-axis laser measurement and ovality control during production
• Print Temperature: 190–230°C (no fillers — start at lower end and adjust; may print 5–10°C higher than standard PLA)
• Bed Temperature: 0–60°C
• Print Speed: 60–250mm/s (higher speeds achievable at higher print temperatures)
• Bed Surfaces: Bambu High Temp Plate, Bambu Cool Plate, Bambu Textured PEI, heated bare glass, blue painter's tape, BuildTak, WhamBam
• Spool Options: 1kg (2.2lbs) / 4kg — AMS-compatible spool
• Key Strengths: No fillers or stretchers, virgin resin, consistent diameter, easy to print, pleasant scent
• Packaging: Vacuum-sealed with desiccant packet to prevent moisture absorption
• Quality Control: Multi-axis laser diameter and ovality measurement in real-time during production
• Compatibility: Most 1.75mm FDM 3D printers, including Bambu Lab AMS