3D-Fuel Standard PLA+ | Daffodil Yellow | 1.75mm | Made in USA

Pure NatureWorks Resin. No Fillers. Made in the USA. In Daffodil Yellow.

The fresh, bright yellow of daffodils in bloom — that's exactly what Daffodil Yellow Standard PLA+ delivers. A vivid, warm yellow that prints clean and consistently, it's the color for projects that need to stand out without trying too hard.

3D-Fuel Standard PLA+ is built on a simple premise: start with the best raw material and don't compromise it. Every spool is made from 100% virgin NatureWorks™ Ingeo 4043d PLA resin — no fillers, no stretchers, no blending agents. The result is a more predictable, consistent printing experience, spool after spool. Because no fillers are altering the melt behavior, you may find the ideal print temperature runs 5–10°C higher than your usual PLA settings — dial in from the lower end of the recommended range and adjust from there.

It's an easy-to-print, hard plastic with a pleasant, barely-there sugary scent during extrusion — exactly what standard PLA should be, just made better. The AMS-compatible spool makes it a natural choice for multi-color workflows on Bambu Lab systems, and it's been tested across a full range of printer brands to ensure reliable performance wherever you run it.

Available in 1kg and 4kg spools — choose your spool size when adding to cart.

A reliable, vibrant yellow for makers at every level — perfect for:

• Safety-themed prints, high-visibility components, and warning markers
• School and STEM projects, science fair models, and educational displays
• Decorative home accessories, vases, and seasonal pieces
• Toy parts, game accessories, and hobby models requiring a bold color
• Multi-color Bambu Lab AMS workflows requiring a clean, vivid yellow
• Cosplay props and accessories with a bright, eye-catching finish
• Signage, labels, and organizational prints where color identification matters

Printer Compatibility: Compatible with most 1.75mm FDM 3D printers. AMS-compatible spool. Tested in-house on Bambu Lab, Creality, Prusa, Raise3D, MakerBot, LulzBot, FlashForge, and more.

Key Properties

• Material: PLA+ — 100% virgin NatureWorks™ Ingeo 4043d PLA resin
• Color: Daffodil Yellow
• Origin: Made in the USA — 3D-Fuel US production facility
• Diameter: 1.75mm
• Diameter Tolerance: Multi-axis laser measurement and ovality control during production
• Print Temperature: 190–230°C (no fillers — start at lower end and adjust; may print 5–10°C higher than standard PLA)
• Bed Temperature: 0–60°C
• Print Speed: 60–250mm/s (higher speeds achievable at higher print temperatures)
• Bed Surfaces: Bambu High Temp Plate, Bambu Cool Plate, Bambu Textured PEI, heated bare glass, blue painter's tape, BuildTak, WhamBam
• Spool Options: 1kg (2.2lbs) / 4kg — AMS-compatible spool
• Key Strengths: No fillers or stretchers, virgin resin, consistent diameter, easy to print, pleasant scent
• Packaging: Vacuum-sealed with a desiccant packet to prevent moisture absorption
• Quality Control: Multi-axis laser diameter and ovality measurement in real-time during production
• Compatibility: Most 1.75mm FDM 3D printers, including Bambu Lab AMS