3D-Fuel Standard PLA+ | Snow White | 1.75mm | Made in USA

Pure NatureWorks Resin. No Fillers. Made in the USA. In Snow White.

Soft, pure, and naturally white — Snow White sits just a touch warmer and softer than Brightest White, giving prints a clean, refined finish without the stark, high-contrast look. It's the white that works for everyday models, display pieces, and anything where a natural, balanced tone is more appropriate than a clinical brightness.

3D-Fuel Standard PLA+ is built on a simple premise: start with the best raw material and don't compromise it. Every spool is made from 100% virgin NatureWorks™ Ingeo 4043d PLA resin — no fillers, no stretchers, no blending agents. The result is a more predictable, consistent printing experience, spool after spool. Because no fillers are altering the melt behavior, you may find the ideal print temperature runs 5–10°C higher than your usual PLA settings — dial in from the lower end of the recommended range and adjust from there.

It's an easy-to-print, hard plastic with a pleasant, barely-there sugary scent during extrusion. The AMS-compatible spool makes it a natural fit for multi-color workflows on Bambu Lab systems, and it's been tested across a full range of printer brands for reliable performance wherever you run it.

Available in 1kg and 4kg spools — choose your spool size when adding to cart.

A versatile, everyday white for makers at every level — perfect for:

• Display models, decorative pieces, and home accessories with a soft, natural finish
• Figurines, busts, and collector pieces where a warmer white suits the subject
• Architectural scale models and interior design mockups
• Multi-color Bambu Lab AMS workflows requiring a clean, balanced white
• Prints intended for painting or post-processing — a neutral white base gives the most accurate color results
• Gift items, personalized keepsakes, and seasonal decorations
• Medical and educational models where a natural white tone is preferred over stark brightness

Printer Compatibility: Compatible with most 1.75mm FDM 3D printers. AMS-compatible spool. Tested in-house on Bambu Lab, Creality, Prusa, Raise3D, MakerBot, LulzBot, FlashForge, and more.

Key Properties

• Material: PLA+ — 100% virgin NatureWorks™ Ingeo 4043d PLA resin
• Color: Snow White
• Origin: Made in the USA — 3D-Fuel US production facility
• Diameter: 1.75mm
• Diameter Tolerance: Multi-axis laser measurement and ovality control during production
• Print Temperature: 190–230°C (no fillers — start at lower end and adjust; may print 5–10°C higher than standard PLA)
• Bed Temperature: 0–60°C
• Print Speed: 60–250mm/s (higher speeds achievable at higher print temperatures)
• Bed Surfaces: Bambu High Temp Plate, Bambu Cool Plate, Bambu Textured PEI, heated bare glass, blue painter's tape, BuildTak, WhamBam
• Spool Options: 1kg (2.2lbs) / 4kg — AMS-compatible spool
• Key Strengths: No fillers or stretchers, virgin resin, consistent diameter, easy to print, pleasant scent
• Packaging: Vacuum-sealed with a desiccant packet to prevent moisture absorption
• Quality Control: Multi-axis laser diameter and ovality measurement in real-time during production
• Compatibility: Most 1.75mm FDM 3D printers, including Bambu Lab AMS